Sylfirm X in Burnaby RF Microneedling for the Face
Pigment, redness, pores, scars and laxity, assessed by a physician
Sylfirm X is a bipolar radiofrequency microneedling device with insulated gold needles and two pulse modes. Skin Art MD offers it for the face in Burnaby at Metrotown, with the plan set after a physician assessment.
- 45–60 min
- Typical Session, Plus Numbing Time
- 24–48 h
- Typical Redness and Swelling Window
- 4–6 weeks
- Common Gap Between Sessions
- 45–60 min
- Typical Session, Plus Numbing Time
- 24–48 h
- Typical Redness and Swelling Window
- 4–6 weeks
- Common Gap Between Sessions
What Is Sylfirm X RF Microneedling?
Sylfirm X is a radiofrequency microneedling device: insulated gold needles deliver RF energy into the dermis while sparing the surface. Its repeated-pulse and continuous-pulse modes are used for concerns such as pigment, redness, pores, acne scars and laxity. At Skin Art MD in Burnaby, a physician assessment decides whether it fits your skin.
The facial version uses needle depths suited to thinner facial skin. Medical microneedling is the mechanical, texture-focused alternative; Sylfirm X adds energy and is often discussed when pigment, redness and scars appear together. The body version has its own page. Plans are often framed by goal: pigment and redness lean mainly on the repeated-pulse mode, firmness and pores mainly on the continuous-pulse mode, and acne scars can use both, with session count and spacing set at assessment (commonly 3–6 sessions about 4–6 weeks apart).
Pigment and Redness Mode
The repeated-pulse (RP) mode is used for concerns such as melasma-type pigment and facial redness; response varies, and maintenance may be discussed.
Tightening Mode
The continuous-pulse (CP) mode heats the dermis to support collagen, used for laxity, pores and acne scars.
Surface-Sparing Design
Insulation on the needles confines energy to the tip, which is why the device is discussed for deeper concerns on skin prone to pigment changes.
How Does Bipolar RF Microneedling Work?
Fine needles enter the skin and release radiofrequency energy at the tip. The physician chooses the mode, depth and energy for each facial zone.
RP (Repeated Pulse) Mode
Short pulses used for pigment and vascular concerns.
CP (Continuous Pulse) Mode
Sustained energy that warms the dermis to support collagen, used for laxity, pores and scars.
Insulated Gold Microneedles
Gold-coated, insulated needles deliver energy at the tip rather than along the shaft.
Zone-by-Zone Settings
Depth and energy can be adjusted for each facial zone within one session.
Who Do Clinicians Consider for Sylfirm X?
A physician assessment decides suitability, including skin type, history, medications and what the treatment can realistically offer.
Concerns People Raise
- +Early jowling or reduced jawline definition
- +Melasma-type pigment that has not settled with topical care
- +Persistent redness or visible facial capillaries
- +Acne scars (boxcar, rolling or ice pick) and enlarged-looking pores
- +Concern about pigment rebound after stronger treatments
Reasons the Physician May Advise Waiting
- –Pregnancy or breastfeeding
- –A pacemaker or metal implant in the area
- –Skin infection, open wounds or active inflammatory acne
- –Recent oral acne medication; tell us at booking
- –Dermal filler in the area within the past two weeks
- –Blood-thinning medication or supplements; tell us at booking
What Is Different About Sylfirm X at Skin Art MD?
RF microneedling depends on careful depth and energy settings. Here it is delivered within a physician-led clinic at Metrotown.
Physician-Led Clinic
Plans sit within the care of the clinic's medical director, Dr. Charles Jiang.
Zone Mapping
Settings are planned zone by zone rather than one setting for the whole face.
Pigment Awareness
Parameters are chosen with the risk of pigment rebound in mind, which matters for melanin-rich skin.
Multilingual Team
Consultations are available in English, Mandarin and Cantonese.
Which Facial Areas Can It Treat?
Suitability for each area is confirmed at your consultation.
Full Face
Overall skin quality, pores and texture.
Cheeks
Redness, capillaries, pores and pigment patches.
Jawline and Jowls
Support for a more defined lower face.
Under the Eyes
Fine lines and laxity, treated close to the orbital rim with care.
Forehead and Temples
Fine lines and texture, with settings for thinner skin.
Neck
Extending to neck laxity and lines.
What Happens During a Sylfirm X Visit?
Sessions run about 45 to 60 minutes, plus time for numbing cream to take effect.
Before Your Visit
Tell us about medications, implants, pregnancy and recent procedures
Use sunscreen and avoid tanning beforehand
Pause retinoids and strong acids for about 3 days unless advised otherwise
Arrive with a clean face
During Your Session
Assessment and Mapping
The physician reviews your goals, skin and any vascular concerns, and sets the mode and settings.
Numbing
A topical numbing cream is applied and left for about 30 to 40 minutes.
RF Microneedling
The handpiece is applied across each zone; you may feel warmth and a light prickle.
Soothing Care
A calming serum or mask is applied and written aftercare is provided.
After Your Session
Redness and mild swelling for 24 to 48 hours are common
Pinpoint scabbing can last a few days; do not pick
Use gentle products and strict daily sunscreen
Avoid heat, sweating and exercise as advised
Makeup can resume once pinpoint marks have settled and the team says the skin is ready
**Individual results vary. A physician assessment decides suitability.
Sylfirm X Burnaby Questions Answered
What is Sylfirm X, and how long does a session take?+
Sylfirm X is a bipolar radiofrequency microneedling device with insulated gold needles and two pulse modes, used on the face for concerns such as pigment, redness, pores, scars and laxity. A session typically takes about 45 to 60 minutes, plus time for the numbing cream to take effect.
How is Sylfirm X different from regular microneedling?+
Regular microneedling is mechanical and texture-focused. Sylfirm X adds radiofrequency energy, which is why it is discussed for pigment, redness and scars together.
Can Sylfirm X be used for melasma?+
It is used as part of care for melasma-type pigment. Melasma tends to recur, so a physician assessment sets expectations and maintenance.
Is it used on Asian skin tones?+
Parameters are chosen with the risk of pigment rebound in mind. A physician assessment decides suitability.
How many sessions are usually needed?+
Often a series of 3 to 6 sessions about four to six weeks apart; the number depends on the concern, and the physician sets the plan at your assessment. Results vary.
What is recovery like, and when can I wear makeup?+
Redness and mild swelling for 24 to 48 hours are common, and pinpoint scabbing can last a few days. Most people resume normal activities within a day or two. Makeup can resume once the pinpoint marks have settled and the team says the skin is ready; strict daily sunscreen and gentle products matter in the meantime.
Does Sylfirm X help acne scars?+
Sylfirm X is used for acne scars and enlarged-looking pores, because the radiofrequency energy delivered through the needles supports collagen remodelling across a series. The continuous-pulse mode is often emphasised for scars and pores. How much a scar softens depends on its type and depth, so the physician assesses your scars first. Results vary.
Can it be combined with other treatments?+
Yes. Plans sometimes pair it with other skin treatments, and filler should be separated by at least two weeks. The physician advises on timing.
Does it hurt?+
A numbing cream is applied first. Most people feel warmth and a light prickle.
How much does Sylfirm X cost in Burnaby?+
Pricing depends on mode and treatment scope and is confirmed at your consultation.
What are the risks, and who should avoid Sylfirm X?+
Expected effects are redness, mild swelling and pinpoint marks for a few days. Pigment changes are possible, particularly in melanin-rich skin, which is why settings are chosen with pigment rebound in mind. Pregnancy, a pacemaker or metal implant in the area, infection, and recent oral acne medication are reasons to wait. The physician reviews your history first.
How long do Sylfirm X results last, and when will I see them?+
Change is usually gradual: early improvement can appear over the first few weeks and builds across the course as collagen remodels. How long results last varies with the concern, sun exposure and home care, and maintenance sessions (often every 6–12 months) are sometimes suggested. Results vary, and no specific outcome is guaranteed.
Book Sylfirm X in Burnaby
Skin Art MD is at #101 – 4378 Beresford St, Burnaby, near Metrotown Station. A physician assessment guides your plan.
Related treatments
Related articles
How it works, who it suits, and what recovery looks like:
- Sylfirm X Body RF Microneedling in Burnaby: CW vs PW Explained
A science-focused look at how Sylfirm X's CW and PW radiofrequency microneedling modes work on body skin laxity, stretch marks and texture in Burnaby — with published evidence and the factors a physician assessment considers.
- Sylfirm X for Melasma and Acne Scars: Effectiveness and Recovery Timeline
Sylfirm X is a dual-wave RF microneedling system for melasma and acne scars. Here is how it works, what effectiveness and recovery look like, and how a treatment series is planned.
- Sylfirm X vs Microneedling: Needles Alone, or Needles Plus Radiofrequency?
Microneedling works mechanically on texture; Sylfirm X adds radiofrequency through insulated gold needles, with RP and CP modes also used for pigment and redness. What each needle does, and what each visit involves at Skin Art MD in Metrotown.
- Sylfirm X for Melasma and Redness: How It Works, Session Spacing and Aftercare
Recurring melasma and persistent facial redness bring many people to Sylfirm X. This guide explains what its two pulse modes target, how sessions are usually spaced, what skin does in the days afterwards, and why sun protection and maintenance matter as much as the device.
