V Carbon Peel in Burnaby Activated Carbon Facial at Metrotown
Oil, pores and radiance in a 15 to 20 minute visit
V Carbon is a carbon and acid peel. A film of activated vegetable carbon with mandelic, ferulic and citric acids is applied, activated with a spray, then neutralized and removed. Skin Art MD offers it in Burnaby at Metrotown after a physician assessment.
- 15–20 min
- Typical Session
- 4–6
- Sessions in a Typical Series
- 1–2 hours
- Redness Usually Fades Within
- 15–20 min
- Typical Session
- 4–6
- Sessions in a Typical Series
- 1–2 hours
- Redness Usually Fades Within
What Is a V Carbon Peel and How Does It Work?
V Carbon is a superficial to medium-depth peel system made in Italy by Promoitalia. It pairs activated vegetable carbon with a mandelic, ferulic and citric acid complex: the film goes on, a spray activates it, and after 5 to 10 minutes it is neutralized and taken off. It is discussed for oil, enlarged-looking pores and dullness; a physician assessment decides suitability.
The carbon helps draw oil and debris out of the pores while the acids loosen the surface layer of dead cells. The work is done by the film and spray alone; no laser is used at any step. Redness usually settles within an hour or two, and any light flaking tends to settle in 2 to 3 days. HydraPeel and the Signature Facial are other facial options at the clinic, each with a different focus.
Pores and Oil
Activated carbon helps lift oil and debris from the pores, so they can look cleaner.
Brightening
The acid complex exfoliates the surface, which can leave skin looking fresher and more even.
Short Recovery
Redness usually fades within 1 to 2 hours, and any mild flaking tends to settle in 2 to 3 days.
How Does a V Carbon Peel Work?
Three parts work together: a carbon film, an activating spray and a neutralizing step. The spray lets the clinician adjust how deep the peel works, so the depth can be matched to your skin.
Carbon Film
A film of activated vegetable carbon with mandelic, ferulic and citric acids is spread over cleansed skin.
Spray Activation
A spray activates the ingredients and gives the clinician control over peel depth.
Contact Time
For about 5 to 10 minutes the carbon draws out oil and debris while the acids exfoliate the surface.
Neutralizing and Calming
The film is removed and the skin is neutralized and soothed. No laser is used at any point.
Who Do Clinicians Consider for V Carbon?
Oily, congested or dull skin is the usual focus. A physician assessment decides suitability, and peel depth is chosen for your skin type and pigment history.
Concerns People Raise
- +Enlarged-looking pores and oily or congested skin
- +Dull or uneven complexion
- +Fine lines and early signs of ageing
- +Acne-prone skin between flares
- +Mild pigmentation or uneven tone
- +Wanting a short visit with a quick return to the day
Reasons the Physician May Advise Waiting
- –Active acne flare or skin infection
- –Pregnancy or breastfeeding
- –Photosensitizing medication or a recent oral acne medication; tell us at booking
- –A recent tan or heavy sun exposure
- –An active cold sore, open wound or sunburn on the face
- –A known allergy to any V Carbon ingredient, or very sensitive, inflamed skin
What Is Different About V Carbon at Skin Art MD?
Peel depth and session spacing matter, especially for skin prone to pigment rebound. Here treatment sits inside a physician-led clinic at Metrotown.
Physician-Led Clinic
Plans sit within the care of the clinic's medical director, Dr. Charles Jiang.
Conservative Peel Depth
Depth and session spacing are chosen with pigment rebound in mind, starting gently on skin that marks easily.
Combination Options
V Carbon can be combined with LED light or skin boosters where the plan calls for it.
Multilingual Team
Consultations are available in English, Mandarin and Cantonese.
Which Areas Can V Carbon Treat?
The face is the main area. The physician assesses each zone.
Full Face
Brightness, pores and oil.
Neck and Décolletage
Mild sun damage and texture.
Back and Shoulders
Oily or acne-prone skin on the back.
Hands
Mild age spots and texture.
What Happens During a V Carbon Visit?
A session takes about 15 to 20 minutes, with the film on the skin for 5 to 10 of them. Slight warmth or tingling when the spray goes on is usual, and numbing is not needed. Redness usually fades within 1 to 2 hours, and mild flaking, if any, settles in 2 to 3 days; most people go back to their day straight afterwards. Skin often looks brighter after one visit, and a series of about 4 to 6 sessions, spaced 2 to 4 weeks apart, builds the change, with monthly maintenance if you wish.
Before Your Visit
Avoid sun and tanning beforehand
Pause retinoids and exfoliating products for 3 to 5 days unless advised otherwise
Tell us about medications, allergies and recent procedures
Come with clean, makeup-free skin if you can
During Your Session
Assessment and Cleansing
Your skin is assessed and makeup and oil are cleansed away.
Carbon Film
The carbon film is spread evenly over the treatment area.
Spray Activation
The spray is misted over the film to activate it; slight warmth or tingling is normal.
Contact Time
The film stays on for about 5 to 10 minutes while the carbon and acids work.
After Your Session
Redness usually settles within 1 to 2 hours
Mild flaking, if any, settles in 2 to 3 days; let it shed on its own
Use gentle products and daily sunscreen
Avoid exfoliating products and retinoids for 3 to 5 days, and heavy makeup for the first 24 hours if you can
Book the next session as planned, often 2 to 4 weeks later
**Individual results vary. A physician assessment decides suitability.
V Carbon Burnaby Questions Answered
What is V Carbon?+
V Carbon is a carbon and acid peel. A film of activated vegetable carbon containing mandelic, ferulic and citric acids is applied, activated with a spray, left for about 5 to 10 minutes, then neutralized and removed. The carbon helps lift oil and debris from the pores and the acids exfoliate the surface. It is used for oil, enlarged-looking pores and dullness.
Does V Carbon use a laser?+
No. V Carbon does not use a laser at Skin Art MD. The whole treatment is the carbon film, the activating spray and a neutralizing step, so no laser energy or heat is applied to the skin. Peel depth is adjusted through the activating spray, and the physician chooses it for your skin.
Is V Carbon the same as a Hollywood peel or carbon laser facial?+
No. The treatments sold as a Hollywood peel or carbon laser facial pass a laser over carbon on the skin. V Carbon is a different product: a carbon and acid peel that uses no laser. People often look at both for oil, pores and dullness, and the physician can explain which approach suits your skin.
Does it hurt?+
It is generally comfortable. Most people feel slight warmth or mild tingling when the spray is applied, and numbing is not needed. Tell the clinician if anything feels too strong so the treatment can be adjusted. The whole session takes about 15 to 20 minutes.
Is there downtime, and will my skin peel?+
Downtime is usually short. Redness tends to fade within 1 to 2 hours, and most people return to work the same day. Some people get mild flaking, which usually settles in 2 to 3 days; let it shed rather than picking or scrubbing. Light makeup is usually fine, though it helps to skip heavy makeup for the first 24 hours. Wear sunscreen daily.
How many sessions are needed?+
A series of about 4 to 6 sessions, spaced 2 to 4 weeks apart, is common for oil and texture, and some people then book monthly maintenance. Others book a single session for a fresher look before an event. The physician sets the number and spacing for your skin, and spacing may be longer for skin prone to pigment rebound.
Can V Carbon be combined with other treatments?+
Yes. It can be combined with LED light or skin boosters, as the physician advises, either on the same day or in a planned sequence. Stronger treatments are usually spaced apart rather than stacked. Your plan will say which treatments go together and how far apart they should be.
Is it used on Asian skin tones?+
Yes, with care. Asian and darker skin tones are more prone to pigment rebound after irritation, and any peel can cause temporary pigment change, so the physician starts with a conservative depth and daily sunscreen matters. Suitability depends on your skin, any history of pigment change and recent sun exposure, and is decided at the physician assessment.
How is it different from HydraPeel?+
HydraPeel is a hydrating acid exfoliation facial with suction extraction and serum infusion. V Carbon is a carbon film with an acid complex, aimed more at oil, pores and dullness, and it has no suction step. Some people use both at different times; the physician can suggest which fits your skin and goals.
How long do V Carbon results last?+
The fresher look after one session usually lasts from several days to a few weeks, as the surface renews. Oil and texture changes build across a series, and monthly maintenance helps keep them. Daily sunscreen and a steady home routine also matter. Results vary from person to person and are not permanent.
Where is it offered near Vancouver?+
Skin Art MD is at #101 – 4378 Beresford St, Burnaby, a short walk from Metrotown Station on the Expo Line, which makes it easy to reach from Vancouver, New Westminster and Richmond. The clinic is open Tuesday to Sunday, 10:00 to 18:00. Consultations are available in English, Mandarin and Cantonese.
Can I have V Carbon before an event?+
Many people do, because redness usually fades within 1 to 2 hours. For a first session, book a few days ahead in case of mild flaking, which can take 2 to 3 days to settle, and so you know how your skin responds. Avoid trying it for the first time on the day of an important event.
Book V Carbon in Burnaby
Skin Art MD is at #101 – 4378 Beresford St, Burnaby, near Metrotown Station. A physician assessment guides your plan.
Related treatments
Related articles
How it works, who it suits, and what recovery looks like:
- V-Carbon Peel Burnaby BC: The Science of Glowing Skin
Discover the science of the V-Carbon Peel in Burnaby, BC. Learn how this physician-led carbon and acid peel at Skin Art MD, with no laser used, works on pores, oil and dull skin.
- V-Carbon: The Science of Advanced Skin Resurfacing
Explore the biochemical mechanism and clinical evidence behind V-Carbon, a non-laser carbon peel for skin rejuvenation and acne-prone skin, at Skin Art MD in Burnaby.
